From Camouflet
Camouflet Inductor V2 Review: The Desktop Induction Heater Built for Serious Convector Users
If you've been running a Camouflet Inductor V2 setup in your head and wondering whether the investment is justified, the short answer is yes — with some important caveats about who this is actually built for. The Inductor V2 is a dedicated desktop induction heating system designed around Camouflet's own convector ecosystem, converting butane-dependent glass devices into precision, dial-controlled desktop rigs. It's not a universal induction heater trying to be everything to everyone. It's a purpose-engineered system, and that specificity is both its greatest strength and the thing that'll make it wrong for some buyers.
What Is the Camouflet Inductor V2?
The Inductor V2 is a two-piece desktop system: a tabletop power unit and a separate handheld Inductor Lighter Head connected via cable. The power unit doubles as a rolling tray — a genuinely useful design choice that consolidates your entire session surface into one organized footprint. On the unit itself, you get a power adjustment dial, a voltage meter, and the V2's headline feature: user-switchable 110V/240V compatibility, which makes this a legitimately global device without adapters or step-down converters.
The Lighter Head is what you actually bring to your device. It's compact enough to handle comfortably while still housing Camouflet's proprietary F-Core induction coil — the patent-pending heating element at the center of everything this system does. The cable tether is long enough to give you natural movement without feeling like you're fighting it, though desktop users will mostly be keeping everything within arm's reach anyway.
V2 brings two significant hardware upgrades over the original: a redesigned magnet tray that properly accommodates the larger XL-format devices (Convector XL V1/V2, Ceramo XL), and larger cooling magnets throughout for improved thermal management under extended use. If you were running an original Inductor with XL devices and finding the fit slightly awkward, V2 addresses that directly.
Compatible devices span the full current Camouflet lineup: Convector V2, Convector XL V1 and V2, Ceramo XL, Injector, and Banger. That's meaningful — you're not buying into a narrow compatibility window that becomes obsolete the next time Camouflet releases something new.
How It Works
Induction heating works by generating an alternating electromagnetic field that induces eddy currents in a susceptor material — in this case, the stainless steel components built into Camouflet's convectors. Those currents generate heat directly within the metal itself, rather than transferring heat from an external flame source. The practical result: faster, more even, more controllable heat delivery than butane, with no combustion byproducts anywhere near your airpath.
F-Core is Camouflet's name for the specific coil geometry and driver circuit design inside the Lighter Head. The exact engineering isn't publicly disclosed (it's patent-pending), but the functional output is a noticeably consistent heat field. Where a poorly designed induction coil can create hot spots — heating one side of a susceptor faster than another — F-Core produces a more uniform temperature distribution across the device's heating surface. You feel this in the vapor: there's less of the uneven extraction you can get with torch heating, where one side of your load is further along than the other.
The adjustment dial is the interface you'll use most. It runs from low to high power, and meaningful operating range for most devices sits in the middle third of the dial's travel. At lower settings with a Convector V2, you're looking at gentler, more flavor-forward extraction — comparable to what you'd achieve with a carefully dialed-back torch at around 170–185°C range. Push the dial toward the upper half and you're driving toward more complete extraction in the 195–215°C territory. At maximum power, heat-up to draw-ready on a Convector V2 is in the 20–35 second range depending on load size and ambient temperature. This is slower than an aggressive torch hit, but far more repeatable.
The session experience is fundamentally different from torch use. There's no flame, no audible hiss, no thermal overshoot from an uncontrolled heat source. You apply the Lighter Head, watch the voltage meter (which gives you a live read on coil load and by proxy, heating progress), and develop a feel for timing over a session or two. Most users settle into a rhythm where they're pulsing the head on and off between draws rather than holding it continuously — this gives you better temperature control and extends the session without scorching.
Vapor Quality & Performance
This is where the Inductor V2 genuinely earns its price tag for the right user. Induction heating through F-Core on a Convector V2 produces some of the best vapor quality you can extract from that device — cleaner and more consistent than all but the most technically precise torch technique.
Flavor is the first thing you notice. The absence of any torch gas, the lack of direct flame contact with the glass, and the more even heat distribution all contribute to a noticeably cleaner terpene profile in the first half of a session. Where torch heating can introduce subtle off-notes — particularly if your torch isn't fully purged or you're running hot — induction sessions have a transparency that puts the material front and center.
Density is adjustable in a way that's genuinely useful. At lower dial settings, early draws are light and aromatic — the kind of vapor that experienced users specifically seek out at session start for full flavor. Cranking the dial mid-session to push toward completion is responsive; you'll typically see denser vapor within one to two draws of increasing power. This dial-in-real-time control is something torch technique simply can't replicate with the same precision.
Efficiency is excellent. The even heat distribution means the full load is progressing through extraction together rather than having overdone edges and underdone centers. End-of-session ABV (already been vaped) material from an Inductor-run session is typically more uniformly spent than from torch sessions, which tells you extraction is happening more evenly throughout the mass of the load.
For the Ceramo XL specifically — a device that benefits enormously from heat consistency given its larger ceramic chamber — the Inductor V2 is arguably the optimal way to run it. The upgraded V2 magnet tray ensures the XL sits properly, and the F-Core field covers the larger susceptor area without the drop-off you'd see from a coil not designed for the XL format.
Build Quality & Design
The rolling tray integration is more thoughtful than it might sound on paper. Having the power unit, tray surface, and all your session accessories in one integrated surface means less clutter and a genuinely organized desktop setup. The tray surface itself is a practical size — large enough to stage devices, store accessories, and work comfortably. The voltage meter is a nice functional touch; it's not just decorative, it gives you real-time feedback on coil engagement that you'll actually reference during sessions.
The Lighter Head feels solid in hand. It's not ultralight, but it's not heavy enough to be fatiguing during normal desktop use. The cable connection is secure without feeling fragile — this is the kind of joint that takes the most abuse in daily use, and it appears engineered accordingly. The V2's larger cooling magnets are an internal upgrade you won't see directly, but you'll notice the thermal performance: extended sessions don't result in the same warmth in the head housing that some users reported with the original.
The voltage meter doubles as a useful diagnostic — if you're seeing unexpected readings, it can flag whether you've got a positioning issue with the head relative to the device. It's a small thing, but it adds to the feeling that this was designed by people who actually use it.
Build-quality complaints are minor. The cable, while functional, isn't the most elegant solution — it's a physical tether that some users will find slightly limiting compared to truly cordless options. And the rolling tray aesthetic, while functional, is unambiguously utilitarian; this isn't a showpiece device in the way some high-end vaporizers are.
How It Compares
Inductor V2 vs. SIC Induction Heaters
SIC (specifically the various SIC-compatible induction units circulating in the enthusiast market) are the most common direct comparison. SIC heaters are often designed around broader compatibility — they'll work with a wider range of third-party susceptor-equipped devices. The tradeoff is that fit and field optimization are generalized rather than specific. With the Inductor V2, because Camouflet engineered both the heater and the device susceptors together, the heat transfer geometry is purpose-matched. In real-world use, this shows up as more consistent heat distribution and slightly better low-end dial precision. SIC setups can be more flexible if you're running multiple non-Camouflet devices, but if you're primarily in the Camouflet ecosystem, there's no reason to compromise on fit.
Inductor V2 vs. Elev8r Induction
The Elev8r induction setup is a respected option in the dry herb induction space, but it's built around a fundamentally different device — the Elev8r glass piece — and a different heating approach. Elev8r induction produces excellent results in its own ecosystem. The comparison is mostly relevant for users deciding which ecosystem to enter. The Inductor V2's rolling tray integration, adjustable power dial with live voltage feedback, and the depth of the Camouflet device lineup give it an edge for users who want a more feature-complete desktop setup. Elev8r remains a worthy competitor if you're already invested in that glass.
Inductor V2 vs. GreenDot Labs Induction
GreenDot makes well-regarded induction setups, and their heater/device compatibility is broad. For Camouflet users specifically, GreenDot is an interesting alternative because some GreenDot heaters can work with Camouflet susceptor devices. The Inductor V2's advantage here is integration and warranty support — using a third-party heater with Camouflet devices is possible but moves you outside the supported ecosystem. If something goes wrong, the troubleshooting conversation gets complicated. The Inductor V2 at $379 is priced in GreenDot territory, so this is a real comparison to make, but for buyers who want everything to work together as designed and want Camouflet's support behind the full setup, the Inductor V2 is the cleaner choice.
Tips for Getting the Most Out of It
- Spend a session calibrating your dial positions. Each Camouflet device has a slightly different sweet spot on the dial. Take notes after your first few sessions — you'll quickly develop reliable reference points for low, medium, and high-temp extractions with each device you use.
- Use the pulse technique. Rather than holding the Lighter Head in continuous contact throughout a draw, apply it for 10–15 seconds, draw, remove, let the device settle for 5–10 seconds, then re-apply for the next draw. This prevents heat overshoot and keeps you in a more precise temperature window throughout the session.
- Watch the voltage meter, not a timer. The meter gives you real-time feedback on coil engagement. Once you've run a few sessions, you'll recognize what the meter looks like at draw-ready temperatures for your specific device. It's more reliable than counting seconds.
- Let the head cool between devices. If you're switching between a Convector V2 and a Ceramo XL in the same session, give the Lighter Head 60–90 seconds between uses. The larger cooling magnets in V2 handle extended sessions well, but unnecessary accumulated heat doesn't help precision.
- Keep the magnet tray clean. Residue buildup on the tray can affect how devices seat, which affects field coupling and heat consistency. A quick wipe with isopropyl alcohol after sessions keeps the contact geometry correct.
- For the Ceramo XL specifically, start at a slightly higher dial position than you'd use for standard Convectors — the larger chamber mass takes more initial energy to bring up to temperature. From there, you can dial back for subsequent draws.
Who Should Buy the Camouflet Inductor V2?
Buy This If:
- You're already running one or more Camouflet convectors and want to transition away from butane for your primary sessions. This is the device's core use case and it excels at it.
- You want dial-controlled, repeatable temperature precision that torch technique fundamentally can't match. If you've been frustrated by inconsistency session to session, induction is the answer and the Inductor V2 is the right induction heater for this ecosystem.
- You run multiple Camouflet devices. The compatibility across the full lineup — from Convector V2 to Ceramo XL to Injector and Banger — means a single Inductor V2 can serve your entire collection.
- You have a dedicated desktop session space. The rolling tray form factor is purpose-built for a permanent setup, and that integration pays dividends when everything lives together on one surface.
- You're a technically engaged user who will put in the calibration time. The dial-and-voltage-meter interface rewards users who develop a feel for it — this isn't a push-button experience.
Don't Buy This If:
- You're primarily a portable, on-the-go user. The desktop format and cable tether make this a stationary system. It's not designed for sessions away from your setup.
- You don't own any Camouflet devices and aren't planning to. The Inductor V2 is specifically optimized for this ecosystem — using it with non-Camouflet devices will produce suboptimal results at best.
- You want a push-button, set-and-forget experience. The Inductor V2 is precise, but it requires technique development and active engagement during sessions. If you want something that does all the work, look at closed-system electronic devices instead.
- You're budget-constrained. At $379, this is a significant investment. The vapor quality improvement over well-executed torch technique is real but incremental — if your torch game is already dialed, the jump isn't transformative enough to justify $379 for everyone.
Final Verdict
The Camouflet Inductor V2 is the best way to run Camouflet convectors — full stop. The F-Core induction system delivers consistent, even heat that systematically outperforms torch technique for session-to-session repeatability and vapor quality. The rolling tray integration is genuinely useful rather than a gimmick. The V2 upgrades — expanded magnet tray for XL devices, larger cooling magnets — address real limitations of the original and signal a hardware team that's iterating with actual user feedback.
The honest caveat is that this is an ecosystem-specific device with a premium price tag and a technique learning curve. It's not for casual users, not for people new to the Camouflet lineup, and not for anyone expecting automated simplicity. For the experienced Camouflet user who wants to take their desktop setup to its logical ceiling, it's exactly what it needs to be.
The current sold-out status is telling. This is a high-demand item in a community that does its research. If you're on the fence and stock becomes available, move on it — this is not a device that tends to sit waiting.
Rating: 9/10 — Exceptional performance within its intended ecosystem, minor deductions for the cable tether limitation and the technique investment required before the system reveals its full capability.